Be Risk-Free With Reliable Abatement Services


Eco Tech Environmental is a licensed asbestos removal company with extensive experience in properly containing asbestos, complete decontamination of the site, and lawful disposal of the contaminated materials. We are specialists in: vinyl asbestos tile, mastic, vinyl sheet flooring, cement asbestos pipe, cement asbestos siding, cement asbestos roofing, thermal system insulation on duct work, stucco, surfacing texture, drywall, acoustic ceiling, popcorn ceiling, plaster, lath, fireproofing, pipe coverings and many other product forms.

Our containment services fully seal all entry areas contaminated with asbestos. We work hard to maintain safety and to ensure there is no cross contamination of your site. We implement a HEPA Air Scrubber that also acts like a huge vacuum and creates negative air pressure inside the containment so air inside the containment exits clean through the HEPA filters. All asbestos waste is then properly sealed and bagged for disposal at an approved landfill.

If you think your home or building contains asbestos, give us a call today and we can refer an asbestos testing firm.

For more information on Colorado asbestos regulations visit Colorado Department of Public Health & Environment.


Based on a broad range of experience Eco Tech Environmental has developed containment, construction and remediation techniques that comply with EPA guidelines. The moisture source must be eliminated and isolating the area to prevent the mold spores from spreading beyond affected areas. Negative air pressure machines are generally used in conjunction with temporary plastic walls. Mold removal guidelines recommend physically removing finish materials affected with mold. If framing has visual mold growth and is still structurally strong, it can be HEPA vacuumed, sanded and cleaned. Because mold exposure is a chemical exposure there are no short cuts for the physical removal of mold colonies and mold spores. EPA approved moldicide is then applied to contaminated areas as part of the thorough cleaning. Depending on the situation, we may recommend the application of Anti-Microbial coating to prevent the recolonization of Mold on the remediated area.

Any and all mold should be removed from the home for safety. If you see any mold in your home, it needs to be removed quickly. The longer you wait, the greater the damage to your home and the health.


Eco Tech Environmental is an RRP Lead-Safe certified firm. There are several ways to deal with lead containing products, complete removal and disposal (windows, doors, trim, etc.), encapsulation and the stripping of paint. Methods used to safely remove lead-based paint all depend on the size and location of the surface. For smaller areas wet scraping works best. The lead-based paint areas are misted with water while using hand scrapers to dislodge the paint. For larger projects wet sanding or power sanding with a HEPA filter vacuum are used to minimize dust or an electric sander is equipped with a HEPA filtered vacuum attachment. It is very important to do a proper cleaning of lead dust and debris to ensure that lead hazards are not left behind. All debris are then collected in 6-mil plastic bags followed by using wet cloths or wet mops on all surfaces.

When it comes to lead, we work clean and smart to keep dust and fumes to a minimum. If your looking for more information concerning lead-based paint visit